Skip to content
Trailer & Hitch

Weight Distribution & Sway Control

The Best Weight Distribution Hitch Under $500

Under $500 the choice is not between brands, it is between what comes in the box. All three kits here use a friction sway bar you have to unclip before a tight turn, and two of them include the shank and ball that otherwise cost you another eighty dollars.

By Mike M. ·

How this page is funded: we earn a commission if you buy through our links, at no extra cost to you. It never changes which product we rank first. Prices come from Amazon and are read automatically — each one shows the date it was read. Full disclosure.

Top pick under $500

Top pick under $500

Our pick on this page
Camco Eaz-Lift Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058
8.7/10

Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058

Ships ready to tow — hitch ball, sway control ball, U-bolts and chains all pre-installed — which is why this is usually the cheapest route from zero to legally hooked up.

Read the full write-up or compare it with the rest below.

Quick picks

Scored on the published hitch rubric - sway control method (25%), tongue-weight range (20%), backing-up behavior (20%), setup effort (15%), quietness (10%) and price for capability (10%). Every pick carried a live price under $500 and was confirmed in stock before it was featured. Prices move; the figures on the cards are read automatically from retailer listing data and date-stamped, so check the current number before you decide.

#ProductBest forScorePrice
1
Camco Eaz-Lift Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058

Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058

Ships ready to tow — hitch ball, sway control ball, U-bolts and chains all pre-installed — which is why this is usually the cheapest route from zero to legally hooked up.

Top pick under $500
Getting a complete, ready-to-tow kit for the least money8.7/10
2
CURT CURT Round Bar Weight Distribution Hitch with Sway Control, 17062

CURT Round Bar Weight Distribution Hitch with Sway Control, 17062

A conventional round-bar kit with a friction sway bar in the box. It is the cheapest way to get both jobs covered, and the cheapness shows up as a bar you have to remember to unclip.

Most hitch per dollar
The lowest price with sway control included8.7/10
3
Husky Husky Round Bar Weight Distribution Hitch, 30849

Husky Round Bar Weight Distribution Hitch, 30849

The only kit here that arrives with a 10 in shank and a 2-5/16 in ball in the box, which is why its real-world cost undercuts hitches with a lower sticker price.

Most capacity
The cheapest complete kit that still includes shank and ball8.6/10

Tap any row to jump to the full write-up. Prices come from Amazon and are read automatically — see each product below for the date.

The short answer

Buy the Camco Eaz-Lift Elite 48058. It is the only kit at this price that arrives genuinely ready to tow — hitch ball, sway control ball, U-bolts and chain package all pre-installed — so the number on the listing is close to the number you actually spend. If you would rather have more rating and a brand-name sway kit for about the same money, the CURT 17062 ships with a shank, a pre-torqued 2-5/16 in ball and CURT’s own 17200 friction sway kit, rated 8,000–10,000 lb gross trailer weight. The Husky 30849 is the one to buy if your trailer is heavy or you expect to upgrade: 12,000 lb gross, an 800–1,200 lb bar window, 10 in shank and ball in the box — but no sway control at all until you add a friction bar. And read the honest catch below before you commit: if your loaded tongue weight is under about 700 lb, every hitch under $500 is too stiff for your trailer, and the kit you want sits roughly eight dollars over the cap.

Weight distribution hitches run from about $330 to just under $1,000 in this field, and the spread is not mostly about build quality. It is about where the sway control lives. Spend $550 or more and you get sway resistance designed into the head of the hitch, working all the time, with nothing to unclip. Spend under $500 and you get a spring-bar kit plus a separate friction bar — or no sway control in the box at all. That single structural difference explains almost every price gap on this page, and it is worth more attention than any brand argument.

Which does not make the cheap route wrong. A friction bar correctly set up on a 5,000 lb trailer behind a half-ton truck is a real improvement over no sway control, it is what thousands of owners tow with every weekend, and the money saved buys a brake controller you may need more. But you should know exactly what you are accepting, which is the point of this page.

Friction sway control: a separate bar that clamps between the trailer A-frame and the hitch head and resists side movement by sliding against a friction pad. It works, it is cheap, and it has one rule: it must be unclipped before a tight turn or backing maneuver, or you can bend the bar and damage the mounting ball. Integral 4-point systems resist sway inside the head instead, which is why they cost more and why you can back into a site without getting out. The full comparison of sway control types goes through all four.

What $500 actually buys, and what it does not

Four things decide this at the budget end, and they are not the four you would guess from the listings. Price for capability comes last, because at this price every option is already cheap — what separates them is what you have to buy afterward.

What is in the box, not what is on the listing. A weight distribution hitch needs a head, spring bars, frame brackets, a shank that fits your receiver and a hitch ball of the right size. Buy a kit that omits the shank and ball and you add roughly $40–$90 at today’s prices — our own registry carries a 2-5/16 in ball and an adjustable ball mount, and you can see what those run on the ball mount roundup. That is the difference between a $330 hitch and a $420 hitch, and it is invisible until the box arrives. All three picks here include the ball. Two include the shank.

The bar window, measured against your real tongue weight. Spring bars are rated as a range, and a bar far stiffer than your tongue weight does not distribute gently — it transmits every seam in the road into the tow vehicle and can lift the trailer frame instead of leveling the rig. The cheapest kits in this field are rated 800–1,200 lb (Husky) and 800–1,000 lb (CURT). If your loaded tongue weight is 450–650 lb, which is typical for a 3,500–5,500 lb travel trailer, those bars are wrong for you. Measure it before you buy rather than reading a brochure figure, because loaded tongue weight is commonly 100 lb or more above the dry number.

Whether you can back up without getting out. Every hitch under $500 uses an add-on friction bar, so the answer is no — you unclip before the tight stuff, every time. It takes fifteen seconds and it is a habit rather than a hardship, but on a wet night at a crowded campground it is the thing people most regret saving money on. This is the single biggest behavioral difference between the budget tier and the tier above it, which is why backing-up behavior carries a 20% weight in our rubric.

Noise, honestly. Chain-and-bracket kits creak. Friction bars groan at parking-lot speed. None of the three picks here is quiet in the way an Andersen or a greased-cam system is quiet. Lubricating the sway pad and the bar sockets helps; it does not eliminate it.

KitGross trailer weightTongue weightIn the boxSway control
Camco Eaz-Lift Elite 48058Not published1,000 lbBall, sway ball, U-bolts, chains, pre-installedFriction bar, included
CURT 170628,000-10,000 lb800-1,000 lbShank, pre-torqued 2-5/16 in ball, sway kit 17200Friction bar, included
Husky 3084912,000 lb800-1,200 lb10 in shank, 2-5/16 in ballNone included
Inclusions and ratings read from each maker's published part page or live retail listing, November 2026. 'None included' means the kit ships without sway control, not that sway control cannot be added.

The three picks, and who each one is for

Camco Eaz-Lift Elite 48058 — top pick under $500. This is the one we would buy, and the reason is unglamorous: it is the shortest distance from clicking buy to being legally hooked up. The hitch ball, the sway control ball, the U-bolts and the chain package all arrive pre-installed, rated at 1,000 lb tongue weight, so there is no second order and no trip to a trailer shop for a ball you did not know you needed. The chain-and-bracket layout is also the easiest of the three to understand the first time you set one up, which matters more than it sounds when you are adjusting bracket height in a driveway. The honest cons: the finish is the least durable here and surface rust on the bars is a common owner report, so expect to wire-brush and touch up after a wet season; the friction bar is manually adjusted, so it is on you to set the clamp pressure and to unclip before tight turns; and if you forget to reconnect it, you have no sway resistance at all and nothing on the hitch will tell you.

CURT 17062 — most hitch per dollar. For about the same money as the Eaz-Lift, CURT publishes more: 8,000–10,000 lb gross trailer weight, 800–1,000 lb tongue weight, a shank that flips for drop or rise and fits any 2 in receiver, a pre-torqued 2-5/16 in ball, and CURT’s own 17200 sway control kit in the box. Round bars are also slightly more forgiving of a bracket angle that is not perfectly set, which is the mistake first-timers actually make. The honest cons: the sway resistance is one friction point, so this is the weakest of the three in a genuine crosswind or a semi-truck pass; CURT’s own page notes the install involves frame drilling and that it is not for trailers with surge brakes, so check both before ordering; and the 800 lb bottom of the bar window rules out light trailers, as below.

Husky 30849 — most capacity. Twelve thousand pounds gross, an 800–1,200 lb bar window, and a 10 in shank with a 2-5/16 in ball in the box. That bar window is the broadest here, which means it survives a trailer upgrade — if you expect to move from a 24 ft to a 30 ft trailer in a couple of seasons, this is the kit that comes with you. Steel construction, simple to service, cheap parts. The honest cons are real and they are the reason it ranks third: there is no sway control in the box, so budget for a friction bar on top and accept that your all-in cost lands above the other two; the 800 lb floor is the stiffest starting point here; and it is the heaviest of the three to lift on and off, which you notice every time you store it.

The common mistake

Buying on the sticker price and then discovering the kit needs a shank and a ball. It is the single most common way a $330 hitch becomes a $420 hitch, and it is entirely avoidable: read the inclusion list, not the headline. The corollary mistake is assuming an included ball is the right size — check your coupler. A 2 in coupler will not sit on a 2-5/16 in ball, and both are common on travel trailers. Our ball size chart takes two minutes and settles it.

The honest catch: what sits just over $500

A price cap is a useful way to shop and a slightly artificial way to think, and on this page the gap is unusually narrow. Three more hitches in this field sit within about $20 above $500 at the time of writing. If your real budget is $520 rather than $500, you have six options instead of three, and two of them are materially different products.

The most important of them is the Camco Eaz-Lift ReCurve R3, which is a 600 lb-class kit with adjustable sway control and a 2 in ball included. It is the only kit anywhere near this price with a bar rating light enough for a genuinely light trailer, and it is the answer for the buyer the three picks above do not serve: a 3,500–5,000 lb travel trailer with 450–600 lb of loaded tongue weight behind a mid-size truck or SUV. It currently sits a few dollars over the cap. We are not going to pretend it is under $500 to keep the page tidy — if that is your trailer, go and look at it. The 5,000 lb trailer page is built around exactly that case, and the pop-up page goes lighter still.

Also within reach of a $520 budget are the two Fastway e2 kits, which integrate 2-point sway control into the head instead of hanging a friction bar off the A-frame. That is the step this whole page is about: no bar to unclip, sway resistance that is always working, and a noticeably better experience backing into a site. How the e2 compares to the 4-point standard is worth ten minutes if you are hovering at this price. Neither e2 includes a ball, so run the all-in math before you decide it is only twenty dollars more.

And if you are shopping at this end because you are not sure the hitch is necessary at all, read whether a weight distribution hitch is worth it first. There are tow-vehicle and trailer combinations where the honest answer is that you do not need one, and the cheapest hitch is the one you did not buy.

Working out what it really costs you

Run this before you buy, because the ranking on this page can flip on your particular trailer. Start with the kit price. Add a shank if the kit has none. Add a ball if the kit has none, or if the included ball is the wrong size for your coupler. Add a friction sway bar if the kit has none — that is the Husky’s situation. Then add the one tool this job genuinely requires, which is a torque wrench, because the ball nut and the shank pin on a weight distribution hitch are torque-critical and a guess is not good enough.

Do the same arithmetic on the tier above and the gap often narrows to less than you expect. An integral 4-point hitch that includes nothing can land within $100 of a budget kit that includes everything — and buys you the ability to back into a site without getting out of the truck. That is the comparison worth making, rather than the one between three friction-bar kits priced within forty dollars of each other.

What to remember

  • Under $500 every option uses an add-on friction sway bar. Integral sway control starts just above this cap.
  • Read the inclusion list, not the headline price: a shank and ball can add $40-$90.
  • The Eaz-Lift Elite is the only pick that arrives genuinely ready to tow.
  • The CURT 17062 publishes the most capability for the money, and needs frame drilling.
  • The Husky 30849 has the widest bar window and no sway control in the box.
  • If your loaded tongue weight is under about 700 lb, no hitch under $500 has a soft enough bar for you.
  • Measure loaded tongue weight at a scale. The dry figure in the brochure is routinely 100 lb light.
  • A friction bar must be unclipped before every tight turn or you can bend it.

How we picked

Every hitch on this page was in the registry before this page existed, carried a live price under $500 on the day of writing, and was confirmed currently in stock before it was featured. The ranking applies the published hitch rubric, and the weights do the work: sway control method and backing-up behavior together carry 45%, because for a first-time owner those are the two things that decide whether towing feels manageable. Capability figures are read from each maker’s published part page where one exists — CURT publishes a full specification for the 17062, which is also how we corrected our own listing of what is in its box — and from the live retail listing where it does not. Every figure here traces back to the maker that will stand behind it. Where a maker publishes no figure, such as Camco’s gross trailer weight for the Elite, the table says so rather than estimating. Prices are read automatically from retailer listing data and date-stamped, and they move, so the cap in the title is a shopping boundary rather than a permanent fact. The rubric and its weights are published on how we pick.

The picks in full

Camco Eaz-Lift Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058
Top pick under $500

Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058

Camco Eaz-Lift · Best for getting a complete, ready-to-tow kit for the least money

8.7/10

Ships ready to tow — hitch ball, sway control ball, U-bolts and chains all pre-installed — which is why this is usually the cheapest route from zero to legally hooked up.

Key specifications

Tongue weight
1,000 lb
Sway control
Manually adjusted friction bar, included
Included
Hitch ball, sway ball, U-bolts, chain package
Assembly
Pre-installed hardware

Capacity figures read from Camco Eaz-Lift specifications, October 2026.

How it scored

  • Sway control (25%)5
  • Tongue-weight range (20%)7
  • Backing up (20%)4
  • Setup effort (15%)8
  • Quietness (10%)6
  • Price for capability (10%)10

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Genuinely complete in the box — no second order for a ball
  • Lowest all-in cost of any kit here
  • Chain-and-bracket setup is easy to understand

Good to know

Manual friction sway control: unclip before tight turns, every time

CURT CURT Round Bar Weight Distribution Hitch with Sway Control, 17062
Most hitch per dollar

CURT Round Bar Weight Distribution Hitch with Sway Control, 17062

CURT · Best for the lowest price with sway control included

8.7/10

A conventional round-bar kit with a friction sway bar in the box. It is the cheapest way to get both jobs covered, and the cheapness shows up as a bar you have to remember to unclip.

Key specifications

Gross trailer weight
10,000 lb
Sway control
Separate friction bar, included
Bars
Round bar
Included
Shank, pre-torqued 2-5/16 in ball, sway kit 17200

Capacity figures read from CURT 17062 specifications, October 2026.

How it scored

  • Sway control (25%)5
  • Tongue-weight range (20%)8
  • Backing up (20%)4
  • Setup effort (15%)7
  • Quietness (10%)6
  • Price for capability (10%)9

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Sway control included at this price, which is unusual
  • Round bars tolerate a slightly wrong bracket angle
  • Shank and pre-torqued 2-5/16 in ball in the box

Good to know

The friction bar must be unclipped before a tight turn or you can damage it

Husky Husky Round Bar Weight Distribution Hitch, 30849
Most capacity

Husky Round Bar Weight Distribution Hitch, 30849

Husky · Best for the cheapest complete kit that still includes shank and ball

8.6/10

The only kit here that arrives with a 10 in shank and a 2-5/16 in ball in the box, which is why its real-world cost undercuts hitches with a lower sticker price.

Key specifications

Gross trailer weight
12,000 lb
Tongue weight range
800-1,200 lb
Included
10 in shank and 2-5/16 in ball
Sway control
None integral — add a friction bar

How it scored

  • Sway control (25%)4
  • Tongue-weight range (20%)8
  • Backing up (20%)4
  • Setup effort (15%)7
  • Quietness (10%)7
  • Price for capability (10%)9

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Complete out of the box: shank and ball included
  • Tongue-weight window is broad enough to survive a trailer upgrade
  • Steel construction, simple to service

Good to know

No built-in sway control, so you add a friction bar and remember to unclip it before backing

Our recommendation

Of the 3 picks above, these are the two to choose between.

Camco Eaz-Lift Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058

Our pick

Camco Eaz-Lift Elite 1,000 lb Weight Distribution Hitch Kit, 48058

8.7/10

Best for getting a complete, ready-to-tow kit for the least money. Ships ready to tow — hitch ball, sway control ball, U-bolts and chains all pre-installed — which is why this is usually the cheapest route from zero to legally hooked up.

CURT CURT Round Bar Weight Distribution Hitch with Sway Control, 17062

Runner-up

CURT Round Bar Weight Distribution Hitch with Sway Control, 17062

8.7/10

Best for the lowest price with sway control included. A conventional round-bar kit with a friction sway bar in the box. It is the cheapest way to get both jobs covered, and the cheapness shows up as a bar you have to remember to unclip.

Common questions

Yes, if the bar rating matches your loaded tongue weight. The compromise is a friction bar you must unclip before tight turns and single-point sway resistance — not a safety failure, but less convenient and less composed in a crosswind.

Sources

Brands: want your product tested? For Brands.