Skip to content
Trailer & Hitch

Towing Setup & Capacity

Weigh Safe Hitch Alternatives

People shop away from the Weigh Safe for one of four reasons: price, drop, capacity, or because they would rather measure tongue weight properly than through the ball. Each reason points at a different mount.

By Mike M. ·

How this page is funded: we earn a commission if you buy through our links, at no extra cost to you. It never changes which product we rank first. Prices come from Amazon and are read automatically — each one shows the date it was read. Full disclosure.

Closest like-for-like

Closest like-for-like

Our pick on this page
Andersen Hitches Andersen Rapid Hitch Adjustable Ball Mount, 3410
9.2/10

Andersen Rapid Hitch Adjustable Ball Mount, 3410

Aluminum body, plate-steel dual ball, six inches of drop or rise. The practical case for it is owning two trailers with different coupler heights and one ball mount.

Read the full write-up or compare it with the rest below.

Quick picks

Scored on the published ball-mount rubric - rated capacity (25%), adjustability (25%), security (20%), build quality (15%) and price for capability (15%). Every mount here was confirmed currently available on the day of writing, and prices move, so check the current figure on the card.

#ProductBest forScorePrice
1
Andersen Hitches Andersen Rapid Hitch Adjustable Ball Mount, 3410

Andersen Rapid Hitch Adjustable Ball Mount, 3410

Aluminum body, plate-steel dual ball, six inches of drop or rise. The practical case for it is owning two trailers with different coupler heights and one ball mount.

Closest like-for-like
One mount that fits a trailer and a utility trailer9.2/10
2
GEN-Y Hitch GEN-Y Mega-Duty 12.5 in Drop Hitch Ball Mount

GEN-Y Mega-Duty 12.5 in Drop Hitch Ball Mount

Twelve and a half inches of drop at a 10,000 lb rating, built in the USA. This is the category where a budget mount is genuinely the wrong answer.

Most drop
A lifted truck that needs real drop with real capacity9.2/10
3
BulletProof Hitches BulletProof Hitches 2 in Aluminum Adjustable Hitch, 14,000 lb

BulletProof Hitches 2 in Aluminum Adjustable Hitch, 14,000 lb

A 14,000 lb rating in an aluminum body with a dual ball, which is the rare combination of high capacity and a mount you can carry one-handed.

Most capacity
High capacity without the weight of a steel drop hitch9.1/10
4
Sherline Sherline LM 2000 Trailer Tongue Weight Scale

Sherline LM 2000 Trailer Tongue Weight Scale

A hydraulic scale you set the coupler down on. It is the only tool here that answers the one question every hitch decision depends on, and it reads up to 2,000 lb.

Measures better
Measuring loaded tongue weight properly, once and for all9.1/10
5
Generic Adjustable Trailer Hitch Ball Mount, 9-1/2 in Drop

Adjustable Trailer Hitch Ball Mount, 9-1/2 in Drop

A budget adjustable mount with a screw-in locking pin and a 7,500 lb rating. Fine for a light trailer; the rating is the reason it is not on the lifted-truck list.

Budget pick
A cheap adjustable mount for a light trailer8.9/10

Tap any row to jump to the full write-up. Prices come from Amazon and are read automatically — see each product below for the date.

The short answer

Name your reason first, because it decides the answer. If you want the same adjustable aluminum mount with more drop range and no scale, the Andersen Rapid Hitch 3410 is the closest like-for-like. If you want a higher rating in a mount you can still carry one-handed, the BulletProof Hitches 2 in aluminum adjustable publishes 14,000 lb. If you have a lifted truck and need real drop, the GEN-Y Mega-Duty gives you 12.5 inches of it at 10,000 lb. And if what you actually wanted was the number rather than the mount, a plain adjustable mount plus a Sherline LM 2000 scale under the coupler costs less than the Weigh Safe and measures in the right place. What the Weigh Safe does better than any of them is make the measurement automatic — it happens every time you hook up, whether you remembered to care or not.

The Weigh Safe aluminum adjustable hitch is the best-known product in a small category, and the reason is a genuinely clever one. It is an adjustable-height ball mount with a hydraulic tongue weight gauge built into the shank, so the moment you set the coupler down on the ball you get a tongue weight reading. Published 12,500 lb gross trailer weight, 4 inches of adjustable drop, stainless 2 in and 2-5/16 in balls, and a two-piece lock set in the box. It solves the real problem that tongue weight is the number every other towing decision depends on and almost nobody measures it twice.

So the honest framing of this page is not that there is something wrong with it. It is that people arrive at the Weigh Safe, look at the price, look at the 4 inches of drop, look at the 12,500 lb rating, and find one of those three numbers does not fit their truck or their budget. Here is where each of those roads goes.

Why the measurement location matters: the Weigh Safe gauge reads the load through the ball, with the hitch in the receiver. A drop-scale like the Sherline reads the load with the coupler resting directly on the scale, with the ball mount out of the picture entirely. Both are telling you about the same tongue, but the drop-scale is measuring the thing itself and the in-hitch gauge is measuring it through an extra joint and some leverage. That is why the in-hitch gauge is the better habit and the drop-scale is the better measurement. If you want the careful version, how to measure tongue weight covers both methods and the bathroom-scale-and-lever trick as well.

The four reasons people shop around

Price. The Weigh Safe sits in the upper bracket for a ball mount — several times what a plain adjustable mount costs, because you are buying a measuring instrument as well as a mount. Two different answers follow from this. One is a plain adjustable mount and no scale, accepting that you will weigh the tongue once a season instead of every time. The other is a plain adjustable mount and a drop-scale, which together still come in under the Weigh Safe and measure in a better place — at the cost of a bulky tool you have to get out and remember to use.

Drop. Four inches of adjustable drop is the common configuration, and it is plenty for a stock-height half-ton with a trailer whose coupler sits where the factory put it. It is nowhere near enough for a lifted truck. If your receiver is high, you need a mount built around drop rather than one that happens to have some, and the measurement that tells you how much takes five minutes with a tape measure.

Capacity. Published 12,500 lb gross trailer weight covers essentially every bumper-pull travel trailer. If you also tow a heavy equipment or car trailer, there are adjustable mounts that publish more — and at least one of them is aluminum, so the extra rating does not cost you a mount you need two hands to lift.

Weight and galling. An aluminum mount in a steel receiver will gall and seize if you never grease it, which is true of the Weigh Safe and true of every other aluminum mount on this page. If you would rather have steel, the steel options here are cheaper and heavier, in that order. Neither material is wrong; the maintenance is just different, and anti-seize on the shank once a year is the whole of it.

MountCapacityDrop / riseMaterialScale
Weigh Safe adjustable (the original)12,500 lb GTW4 in adjustableAluminumBuilt in
Andersen Rapid Hitch 3410Not published6 in drop / riseAluminumNo
BulletProof Hitches 2 in adjustable14,000 lb2 in drop / riseAluminumNo
GEN-Y Mega-Duty10,000 lb12.5 in dropSteelNo
Sherline LM 20002,000 lb scalen/aSteelSeparate tool
Budget adjustable mount7,500 lb9-1/2 in / 8-1/4 inSteelNo
Published figures from each maker where one exists. Drop and rise are the configuration we have in the registry - most of these are sold in several drop heights, so check the variant you are buying.

The five alternatives, by the reason you are here

Andersen Rapid Hitch 3410 — closest like-for-like. If you take the Weigh Safe, remove the scale and add two more inches of adjustment range, this is roughly what is left: an aluminum adjustable ball mount with a plate-steel dual ball covering 2 in and 2-5/16 in couplers, six inches of drop or rise, for a 2 in receiver. The practical case for it is owning two trailers at different coupler heights and one ball mount, which is exactly the case the Weigh Safe also serves. The honest cons: the aluminum body galls against a steel receiver if you never grease it; the pin and clip are the theft weak point unless you add a lock, where the Weigh Safe includes a two-piece lock set; Andersen does not publish a gross trailer weight rating we could quote for this part, so our capacity score is a reading of the construction rather than a published figure; and it costs about what three fixed-height mounts would.

GEN-Y Mega-Duty 12.5 in drop — most drop. If the reason you are reading this is that your truck is lifted and 4 inches of drop was never going to work, stop comparing it to the Weigh Safe and compare it to other drop hitches. Twelve and a half inches of drop, a published 10,000 lb rating that holds up at full drop — which is the specification that usually collapses on cheap drop hitches — a 1,500 lb tongue weight rating, six adjustable positions, locking hitch pins, made in the USA. The honest cons: it is very heavy to handle and to store, because this is steel and a long lever; it is expensive; it is complete overkill behind a stock-height truck; and if your real need was the tongue weight reading rather than the drop, this gives you none of it. The full drop hitch roundup is the better page if drop is your whole problem.

BulletProof Hitches 2 in aluminum adjustable — most capacity. The rare combination on this page: a published 14,000 lb rating in a corrosion-resistant aluminum body with a 2 in and 2-5/16 in dual ball. If your objection to the Weigh Safe was the 12,500 lb number and you did not want to move to steel to beat it, this is the answer, and it is cheaper than the Weigh Safe as well. The honest cons: only 2 inches of drop or rise, so it is emphatically not a lifted-truck solution and it is less adjustable than the original; aluminum needs anti-seize in a steel receiver, same as every aluminum mount here; and there is no scale, no lock set and no measurement of any kind — this is a mount that is very good at being a mount.

Sherline LM 2000 — measures better. Not a ball mount at all, and the most interesting alternative on the page. The Sherline is a hydraulic drop-scale: you jack the coupler down onto it and read the loaded tongue weight off a dial, up to 2,000 lb, with the ball mount out of the measurement entirely. Pair it with any mount you like, including the budget mount below, and you have spent less than the Weigh Safe while measuring in the place the number actually lives. The honest cons, and they are the reason the Weigh Safe exists: it is a tool rather than a habit, so it only tells you anything on the days you remember to get it out; it is expensive for something most people use twice a year; it is bulky to store; and you need level ground and the coupler at the right height for an accurate reading, which is not every campsite — and getting the coupler down onto it squarely is a lot easier with an electric tongue jack than with a hand crank.

Budget adjustable mount — budget pick. A plain steel adjustable mount with a screw-in locking pin, 9-1/2 in of drop and 8-1/4 in of rise, published at 7,500 lb. It is a fraction of the price of everything else here and it has more drop range than the Weigh Safe, the Andersen and the BulletProof combined. It earns its place on this page as half of the cheap route to the same information: this mount plus the Sherline scale. The honest cons: the 7,500 lb rating rules out most loaded travel trailers of any size, which is the whole reason it is not the top pick; there is no published maker specification sheet to check the rating against; and it is heavy steel, so it is not a one-hand lift and it will rust where the paint gets chipped.

The common mistake

Buying an adjustable mount to fix a problem that is actually trailer loading. An adjustable mount sets the coupler height so the trailer tows level, and that is worth doing. It does not change how much weight is on the tongue, it does not control sway, and it is not a substitute for weight distribution on a trailer heavy enough to need it. If the back of the truck is sagging and the steering has gone light, the mount is not the part you are missing — a weight distribution hitch is.

Picking in one line

Reason was price, and you want the number anyway: budget adjustable mount plus the Sherline scale. Reason was price, and the number can wait: budget adjustable mount, weigh the tongue once a season. Reason was drop: GEN-Y, or whatever the drop measurement tells you. Reason was capacity, and you want to keep aluminum: BulletProof. Reason was none of those and you just wanted the same mount without paying for the gauge: Andersen Rapid Hitch.

And if, having read all that, what you actually want is a tongue weight reading on every single hitch-up without thinking about it, the original is still the only product on this page that does that. It is a real feature and the alternatives do not replicate it — they trade it for drop, for capacity, or for money. Which trade suits you is the only question here.

What to remember

  • The Weigh Safe's distinguishing feature is a tongue weight gauge in the shank, read at every hitch-up.
  • Its published numbers are 12,500 lb GTW and 4 in of adjustable drop.
  • Four inches of drop is fine on a stock half-ton and nowhere near enough on a lifted truck.
  • A budget mount plus a drop-scale costs less and measures at the coupler instead of through the ball.
  • A drop-scale only helps on the days you remember to use it. That is the trade.
  • BulletProof publishes more capacity than the Weigh Safe, also in aluminum, for less money.
  • Every aluminum mount here needs anti-seize in a steel receiver.
  • An adjustable mount levels the trailer. It does not reduce tongue weight or control sway.

How we picked

Every mount on this page was already in our registry and every one was re-verified as currently available on the day of writing, with a live price where the retailer published one. The ranking is not a ranking of quality; it is a ranking by how commonly each reason sends people looking, which is what an alternatives page is for. Scores apply the published ball-mount rubric, in which rated capacity and adjustability carry 25% each — which is why a mount with a huge published rating and 2 inches of adjustment does not automatically finish above one with six inches of range. Where a maker publishes no gross trailer weight rating, as Andersen does not for this part, the capacity score is a documented reading of the construction and the table says “not published” rather than carrying a number we cannot source. We have not tested any of these mounts against each other and we do not claim to have; what we have done is read what each maker publishes and say where it stops. NHTSA’s towing guidance is the backdrop for the tongue weight argument throughout. Prices are read automatically from retailer listing data and date-stamped. The rubric and its weights are on how we pick.

The picks in full

Andersen Hitches Andersen Rapid Hitch Adjustable Ball Mount, 3410
Closest like-for-like

Andersen Rapid Hitch Adjustable Ball Mount, 3410

Andersen Hitches · Best for one mount that fits a trailer and a utility trailer

9.2/10

Aluminum body, plate-steel dual ball, six inches of drop or rise. The practical case for it is owning two trailers with different coupler heights and one ball mount.

Key specifications

Drop / rise
6 in
Balls
2 in and 2-5/16 in plate steel dual ball
Receiver
2 in
Body
Aluminum

Capacity figures read from Andersen Rapid Hitch specifications, October 2026.

How it scored

  • Rated capacity (25%)8
  • Adjustability (25%)9
  • Security (20%)6
  • Build quality (15%)8
  • Price for capability (15%)7

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Flip the ball plate instead of buying a second mount
  • Aluminum means you can actually lift it
  • Generous drop and rise range

Good to know

Aluminum galls against a steel receiver if you never grease it

GEN-Y Hitch GEN-Y Mega-Duty 12.5 in Drop Hitch Ball Mount
Most drop

GEN-Y Mega-Duty 12.5 in Drop Hitch Ball Mount

GEN-Y Hitch · Best for a lifted truck that needs real drop with real capacity

9.2/10

Twelve and a half inches of drop at a 10,000 lb rating, built in the USA. This is the category where a budget mount is genuinely the wrong answer.

Key specifications

Drop
12.5 in
Capacity
10,000 lb
Receiver
2 in
Origin
Made in USA

How it scored

  • Rated capacity (25%)9
  • Adjustability (25%)7
  • Security (20%)7
  • Build quality (15%)9
  • Price for capability (15%)6

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Enough drop for a genuinely lifted truck without stacking adapters
  • Capacity holds up at full drop, which is the spec that usually collapses
  • Heavy-gauge construction

Good to know

Very heavy to handle and store

BulletProof Hitches BulletProof Hitches 2 in Aluminum Adjustable Hitch, 14,000 lb
Most capacity

BulletProof Hitches 2 in Aluminum Adjustable Hitch, 14,000 lb

BulletProof Hitches · Best for high capacity without the weight of a steel drop hitch

9.1/10

A 14,000 lb rating in an aluminum body with a dual ball, which is the rare combination of high capacity and a mount you can carry one-handed.

Key specifications

Capacity
14,000 lb
Drop / rise
2 in
Balls
2 in and 2-5/16 in dual ball
Body
Corrosion-resistant aluminum

How it scored

  • Rated capacity (25%)10
  • Adjustability (25%)5
  • Security (20%)7
  • Build quality (15%)9
  • Price for capability (15%)6

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Highest rating here, in the lightest material
  • Dual ball covers both coupler sizes
  • Corrosion resistance is a real advantage on a salted road

Good to know

Only 2 in of drop — not a lifted-truck solution

Sherline Sherline LM 2000 Trailer Tongue Weight Scale
Measures better

Sherline LM 2000 Trailer Tongue Weight Scale

Sherline · Best for measuring loaded tongue weight properly, once and for all

9.1/10

A hydraulic scale you set the coupler down on. It is the only tool here that answers the one question every hitch decision depends on, and it reads up to 2,000 lb.

Key specifications

Capacity
2,000 lb
Type
Hydraulic dial gauge
Use
Jack the coupler down onto the scale
Power
None — mechanical

How it scored

  • How often you use it (40%)9
  • Build quality (25%)9
  • Takes up little room (20%)4
  • Price for capability (15%)5

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • Gives you the loaded number, not the brochure dry number
  • No batteries, no calibration routine, no app
  • Capacity covers essentially every bumper-pull trailer

Good to know

Expensive for a tool most people use twice a year

Generic Adjustable Trailer Hitch Ball Mount, 9-1/2 in Drop
Budget pick

Adjustable Trailer Hitch Ball Mount, 9-1/2 in Drop

Generic · Best for a cheap adjustable mount for a light trailer

8.9/10

A budget adjustable mount with a screw-in locking pin and a 7,500 lb rating. Fine for a light trailer; the rating is the reason it is not on the lifted-truck list.

Key specifications

Capacity
7,500 lb
Drop
9-1/2 in
Rise
8-1/4 in
Pin
Screw-in locking pin included

How it scored

  • Rated capacity (25%)5
  • Adjustability (25%)8
  • Security (20%)7
  • Build quality (15%)6
  • Price for capability (15%)9

The figures above, at the weights above, converted to our published 8.4–9.8 scale by one site-wide formula. Both the weights and the formula are on how we pick, so this number is reproducible from this card.

Why we picked it

  • A fraction of the price of a name-brand adjustable mount
  • Big drop range, useful behind a lifted truck
  • Locking pin included

Good to know

7,500 lb rating rules out most loaded travel trailers

$49.99Adjustable Trailer Hitch Ball on Amazon

$54.99 9% off

Price as of November 18, 2026. #ad How this is funded

Our recommendation

Of the 5 picks above, these are the two to choose between.

Andersen Hitches Andersen Rapid Hitch Adjustable Ball Mount, 3410

Our pick

Andersen Rapid Hitch Adjustable Ball Mount, 3410

9.2/10

Best for one mount that fits a trailer and a utility trailer. Aluminum body, plate-steel dual ball, six inches of drop or rise. The practical case for it is owning two trailers with different coupler heights and one ball mount.

GEN-Y Hitch GEN-Y Mega-Duty 12.5 in Drop Hitch Ball Mount

Runner-up

GEN-Y Mega-Duty 12.5 in Drop Hitch Ball Mount

9.2/10

Best for a lifted truck that needs real drop with real capacity. Twelve and a half inches of drop at a 10,000 lb rating, built in the USA. This is the category where a budget mount is genuinely the wrong answer.

Common questions

Not one we can point you at. The cheaper route to the same number is a plain adjustable mount plus a drop-scale like the Sherline — less money, measured at the coupler, but only on the days you remember to use it.

Sources

Brands: want your product tested? For Brands.